ACCESSORIES

As an experienced partner in the field of textile printing, STAHLS offer you all the accessories you will need to complete a professional finish.

Whatever you are looking for, be it a cover sheet, platen cover, heat tape, heat platen cleaner, or interchangeable lower platens, we have the items you need.

HEAT PRESS CADDIE

Bring your heat press up to the next level

heat_caddy_slider

When using our new Caddie™ you will never again experience any problems sliding garments of different sizes onto the lower heat platen! The Caddie™ will ensure that your Sprint® Maxx™ Clam Mag becomes more flexible. For example, you will now be able to print on both the front and the back of the garment without the need to remove it from the platen, which could save you up to 40% of your production time!

Another useful addition – the height of the press can be adjusted to match the user, and the Caddie™ is fully mobile thanks to its castors, which means that you can position the press wherever you want to place it at any time. Adjustments to the stand can be made in just a few moments, quite simply and easily. The mobility of the press when using the Caddie™ provides a simple and safe working enviroment!

When assembling the Caddie™ only a single wrench is needed. The Heat Transfer Press has to be purchased separately. The Caddie™ is not suitable for the Cap Press or the 15 x 15cm press. Should you have any questions, please contact us.

Shipping Dimenions: 84 x 84 x 31cm
Shipping weight: 27kg


Interchangeable Lower Platens

If you use interchangeable lower platens, it will mean that you can print a variety of different sized garments.

Sprint® Mag/MAXX™ Clam sprint_mag_maxx_clam

  • 18cm (round)
  • 15 cm x 25 cm
  • 20 cm x 25 cm
  • 40 cm x 40 cm
  • 40 cm x 50 cm

UMBRELLA PLATENS: 40cm x 40cm, 40cm x 50cm


Hotronix® Fusion™/Air Fusion™hotronix_fusion_air_fusion

  • 18cm (round)
  • 15 cm x 25 cm
  • 20 cm x 25 cm
  • 40 cm x 40 cm
  • 40 cm x 50 cm

UMBRELLA PLATENS: 40cm x 40cm, 40cm x 50cm


Sprint® Mag Cap/MAXX™ Cap/Clam Basic Cap

  • sprint_mag_cap_maxx_cap_clam_basic_cap6,0 cm x 8,0 cm
  • 7,0 cm x 16,0 cm
  • 7,5 cm x 14,5 cm
  • 9,0 cm x 16,0 cm
  • 10,0 cm x 16,0 cm
  • 10,0 cm x 22,0 cm

Quick slip protectors

The Quick Slip Protector will fit tightly over the lower platen, making it easy to slide garments on and off the platen due to the non-stick coating which reduces friction between the fabric and the platen.

  • Very easy to clean

  • Not suitable for sublimation

    antihaftbeschichtete_schonbezuege

Available in the following sizes:

  • 28 cm x 38 cm
  • 38 cm x 38 cm
  • 40 cm x 40 cm
  • 40 cm x 50 cm

Non Stick Coated pressure pad

For uniform distribution of pressure, when applying over items such as buttons, zippers etc, and for applying close to V-Necks. The pads are 2cm thick, and contain inner foam; the outer pillow is made from a non-stick material.

Available in the following sizes:andruckkissen_antihaftbeschichtet

  • 41 cm x 51 cm for over sized shirts
  • 25 cm x 25 cm for youth shirts
  • 15 cm x 20 cm for shorts and shoulders
  • 13 cm x 46 cm for sleeves and legs

Available as a set of one of each size


Cover Sheets

Cover Sheets are the answer to preventing a vacuum  occuring between the hot platen and the transfer, and they also enable different textures and finishes when pressing.

Cover Sheet – Non-stick coating:abdeckbogen_antihaftbeschichtet

  • Very durable

  • Contamination can be removed easily

  • Produces a slghtly shiny finish, with a delicate textured feel

  • Not suitable for sublimation

  • 46 x 49cm


Grip Cover Sheet:grip_abdeckbogen

  • The sheet is wax coated

  • Not suitable for use with sublimation

  • Produces a slight matt finish

  • Each sheet can be reused many times

  • Approx 46 x 48cm


Grip rubber mat:grip_gummimatte

  • A High quality silicone cloth that absorbs heat very well, and it is ideal for one proof of transfers

  • It is specially designed for the application of CAD-CUT® materials

  • It produces a slightly textured finish.


Thermal tape/Dispenserthermoband_abroller

Thermal tape:

  • This is used to keep the transfer in the correct position on the garment for application

  • The tape is manufactured of heat resistant materials

  • It is particularly suitable for mug transfers

  • Approx 66m long.

Dispenser:

  • Made to be strong and durable

  • It has non-slip rubber studs on the base.


Hot Platen Cleanerheizplatten_reiniger

  • Removes all the muck and dirt from your hot platen

  • Supplied in Packs of three.


Heat Eraserreibeblock

  • Used to clean the lower and heat platen

  • Perfect for cooling transfers quickly

  • Ideal when printing connecting numbers and letters, cooling them before removing the cover sheet.


STAHLS’ EZ Weederstahls_ez_weeder

The EZ Weeder enables easy weeding of CAD-CUT® and CAD-COLOR® transfers.


Squeegeerakel

By using a squeegee, it ensures that the heat resistant carriers (E.g. Magic Mask®) will be correctly sealed to the digitally printed transfers.  The squeegee can also be used to remove the carrier, and used to smooth out evenly all bubbles and creases.